I decided to do a little S24O bike packing trip on ye olde Surly Krampus and my set of Blackburn Elite Outpost bags. I got to my destination and come night fall, let’s just say it wasn’t an ideal sleeping situation. Wicked high winds and a few too many passing cars and motorcycles made it hard to get a good night’s sleep. Usually I would’ve just stuck around, but I had work the following day and homework due as well.
I made the decision to do a late night ride back home, so we’ll say I took a few hour nap before heading home 😉 Spoiler, I know…still enjoy the video though if you want to see what gear I used!
I’ve had a few days off between my old job ending and my new job starting. I decided to do a ride that I’ve started several times, but never completed because honestly it was a pretty boring route to ride solo. Thankfully my old co-worker Simone had reached out to see if I was riding yesterday and she joined me for the 40 mile loop to a local outdoor hot spot, Indian Lake County Park.
The route goes up the Highway 12 bike path which goes North of Madison up towards Sauk City. The trail itself terminates before you actually reach Sauk City, which is a bit sad. I’m hoping more land easements will come to connect the entire route to make it more direct. The nice thing about the trail is it is a great way to access some beautiful state natural areas and parks such as Devil’s Lake State Park, Indian Lake, Pafrey’s Glen, and the Merrimac Ferry with its quaint views.
We took the Highway 12 trail up to its end on Raul road, which we found was named something different than what was on our map. Raul took us across Highway 12 and around to Matz road, which spit us out right on Highway 19 across from Indian Lake County Park!
The park was absolutely packed when we arrived, no surprise there as it seems people are finally rediscovering the outdoors thanks to the Covid 19 pandemic. A bit frustrating as someone who enjoyed these places prior to the pandemic, but happy that it will hopefully encourage the state to invest in more natural areas and do some upgrades to some places that need a serious face lift.
The restrooms were open thankfully, so we took a snack/bathroom break, filled our water bottles, and rolled back home. On the way home we stopped into my new home shop Wheel and Sprocket. I needed some more nutrition and ended up picking up some Floyd’s of Leadville CBD recovery gummies as well as some new flavors of Stroopwafels from GU. It also gave me an opportunity to look around the shop and get familiar with some of the products we carry and see how busy the shop was still on the weekends.
I ended my ride in a local park where I shot a good portion of a sort of chat to the camera style vlog. I do a little taste test of the snacks I picked up, talk a bit about life, and a little bit about some of the new gear I’ve been trying out. I’m looking to experiment more with this style of video to add a bit more of my personality versus just talking about a product. We’ll see if I can keep up a regular schedule. It may be tough with starting the new job and I start a new Marketing course through my school this week as well.
Next weekend I am planning on doing a sub 24 hour overnight as a part of the annual Swift Industries Campout event. Almost all of the state parks are booked up, but know from past excursions that if you bike or hike into a state park, you can’t really be turned away. The other option would be to just stealth camp somewhere in the area, which shouldn’t be too difficult as it gets darker early and I’m planning on testing out my bivy set up and bringing my hammock as a back up.
Assuming the weather cooperates, I’ll try to capture that adventure on camera as well!
As always thank you for reading, watching, and supporting the site. Stay safe and sane and of course…EAT WELL, BIKE OFTEN!
I’ve been waiting to make this announcement as I wanted to respect my current employer, Fitchburg Cycles. Tomorrow is my last official day there though and I feel it’s time for me to update those who give a care on where I’ll be headed!
I’ll be joining the team at Wheel & Sprocket Middleton as a Store Manager. I’m nervous and excited for the new opportunity. I’ve spent a cumulative nearly four years working with Edwin and the folx at Fitchburg Cycles. I considered it my home shop, even when I wasn’t physically in the shop working. I’ve held many events there, took on a lot of responsibilities that kept the shop running (purchasing, social media management, and running the sales floor), and learned so much from my time at the shop. It was a bit of a revolving door of employees during my four years there, but will for sure miss my most recent co-workers.
It will be a bittersweet ending of my time there, but I know that it was time for me to move on. For those who aren’t familiar with Wheel & Sprocket, they are a Midwestern regional chain that was founded in 1973. Chris Kegel was the longtime president of the company until he sadly passed away in 2017. I had the pleasure of working with Chris during my time at Saris managing the silent auction and assisting in planning the annual Saris Gala. I also had ties to Chris and his family during my time as a board member for the Wisconsin Bicycle Federation.
Throughout my time at Saris and the Bike Fed I had met Chris’s daughters Amelia and Tessa as well as his sons Noel and Julian. Noel has taken over as president of the company while Amelia heads up the events and marketing. They’ve grown as a company within the last few years with expanding to new markets such as Middleton and Evanston, IL. They’ve also been expanding and updating their locations in and around the greater Milwaukee area, making for clean and modern looking shops.
It’s nice knowing that while they are a “chain store” that they are still owned and run by the Kegel family. Wheel has a great reputation outside of their shops for giving back to the community. They sponsor a number of local charity rides, started the Chris Kegel foundation which provides funding for cycling infrastructure projects, and they donate funds to a lot of cycling non-profits. Their ride support is always a welcome site when rolling up to a cycling event as they always have great mechanical support.
My hope is once our world gets back to normal after COVID that I’ll be able to join an event or two as it’s always something I’ve enjoyed while working in bike shops.
Another aspect I’m excited about with heading to a new shop is I get to work with some new brands. I have a lot of love and respect for the brands I worked with at Fitchburg Cycles, but I will get to now sell brands like Salsa and All-City who make some fun bikes and products I’ve been a fan of for many years.
I’ll still get the opportunity to sell Liv and Giant, which is exciting and they are wonderful bike brands. Some other brands that will be new for me to sell include Ortlieb (some of the nicest pannier and bike packing gear on the market), Kuat racks, Terra Trike, Tern, Yuba, Felt, and another 4 lettered brand that lots of people know. I shall not name them at this time due to their association with the police bike issue, so I’d just rather not go there. I’m trying this whole if you don’t have something nice to say, don’t say anything at all. It gets me into a little less trouble, but for those who know me…I’m pretty candid about my thoughts and opinions on things.
The opportunity is awesome and I’m excited to getting my feet wet with learning their systems, the new products, the new brands, and meeting a new customer base! I know some of my existing regulars will likely come see me at the new shop and I look forward to exposing them to some new offerings as well.
I don’t know that I’d write much about my day to day job as I tend to like to just talk about my bike, reviewing products, and the rides I’m doing. If anything cool pops up though I’ll be sure to share about it.
That’s all for now. Thank you for reading and as always EAT WELL, BIKE OFTEN!
As a bike shop manager it would be sacrilegious if I didn’t adhere to the N+1 methodology of bike ownership. That’s why when I saw the release of the Topstone Carbon line up, I knew I had to get one.
My shop already had been selling the Topstone Alloy models like hotcakes, so it didn’t surprise me to see Cannondale’s take on an all carbon gravel/any road machine. When the bike first dropped it was hotly debated on a lot of the bike blogs and YouTube channels I follow. I wanted to give the bike a fair chance before writing any sort of review on it. Read on knowing I’ve hit the 500mile mark on the bike just a couple of days ago.
It’s easy to play keyboard warrior about a product without having actually spent real miles on the bike. Snap judgements on the suspension, geometry, tire size, and some of proprietary components seemed to get people all worked up. I’m not sure why, because all of those are fairly minimal issues. This is my first ever Cannondale I’ve owned and was excited to try something new!
Originally I was settled on the “women’s” (I put women’s in air quotes because Cannondale actually uses a unisex style of geometry between the men’s and women’s bikes with the women’s bikes starting at smaller sizes. They also have a wider saddle, shorter stems, and narrower handlebars.) Topstone RX 2 model, but our rep had told me how happy he was with the upgrades of the Ultegra RX model, so I took his advice. It doesn’t hurt that the colour scheme of the RX model also reminded me of the British Racing Green Jaguars I always loved.
The bike has a classic, clean line aesthetic with a modern twist. Adding the skin wall tires with some of my added accessories I think it looks rather smart as the Brits say.
Integrated, 1.5″ lower to 1-1/8″ upper w/ reducer, 25mm Alloy top cap
HollowGram Sealed Bearing, straight pull, 12×100
HollowGram 22, 22mm deep, 25mm ID, tubeless ready
Stainless steel, 14g
WTB Riddler TCS Light, 700 x 37c, tubeless ready
Changes I’ve made:
Stem- swapped to a lighter and shorter Cannondale take off we had at the shop. I went from a 100 down to an 80 (I think, haven’t confirmed that- going off memory.)
PRO TIP! If you are looking at the women’s models, note they come with a shorter stem than the men’s/unisex models and Cannondale has not put what stem lengths they use on their spec sheet for some reason. (It could be buried somewhere and I just haven’t found it yet?)
Handlebar- Took off the flared 40 drops and put on a 40 Giant Contact SL road bar with a shorter reach and drop with no flare. Flared bars just aren’t my jam really. I like this particular bar as it came stock on my Liv Avail Advanced Pro 1 and I love the fit and feel of that bike. I’ve been happy with my decision thus far and would consider upgrading to carbon down the line just to dampen the front end of the bike a bit.
Bar tape- Stock bar tape is usually pretty crap, not always, but often times it’s cheapo and I end up swapping it with something more cushy as I’m not a fan of wearing gloves when I ride all that much. I went with the Brooks Cambium Rubber Bar Tape in the tan colour that matches the skin wall tires.
Saddle- I have to have a cutout in my saddles and I found a Specialized Ruby on eBay for a good price. That’s historically been my favorite road saddle although Ergon and the new 2021 Liv & Giant saddles are also pretty damn awesome. I’ll keep this on for now, but may experiment if I can get my hands on something else to try.
Pedals- I took the Crank Brothers Candy’s off my Krampus and swapped them on. They still remain my favorite walkable cleat/2 bolt style pedals. They are just easy to use and maintain. Shed mud like champs and look good as well.
Bags- I transferred my Blackburn Outpost Elite seat pack to this bike and use the Topeak Fuel Tank Large on my top tube, although I am testing the Blackburn bolt on top tube bag, stay tuned for that review in my production bag review series!
Cycling computer- Giant Neostrack as a back up if/when Strava may fail. I haven’t paired the Cannondale made by Garmin sensor as of yet. TBH it’s not really a feature I care too much about. Maybe if I didn’t already have a bunch of sensors and computers and stuff, it could be a cool option. I just haven’t seen the need to use it.
The changes I made to the bike helped me dial in the fit to just about perfect for me. I’ve used the bike for everything from commuting to work, riding easy single track, bike packing, gravel grinding, and medium distanced road rides (30-40 miles).
I’ll admit that the bike did take some getting used to. At first the addition of a rear suspension element with the Kingpin design felt odd. Now it almost feels strange to ride a bike without it as I’ve come accustom to it smoothing road noise and chatter out for me.
I can say with confidence that if you are looking for an absolutely stiff carbon racing machine, this isn’t that bike. That’s ok though. It’s still impressively responsive and I’ve hit multiple Strava PR’s on this bike. It climbs well, it has amazing traction on just about any surface you throw at it, especially going down hill on sketchy gravel, grass, or dirt trails.
That’s really what I feel the Kingpin excels at, keeping your rear wheel under control. You can’t really tell that you are getting activation of the Kinpin until you realize on other bikes that riding that same line would feel sketchy without it. It’s greatly confidence inspiring and I feel that if someone were looking for a bike that could pull double duty as a cyclocross race machine, this bike would be a great option.
For someone who is newer to off road or multi-surface riding this bike would be a great option as the components are so well spec’d on it that you wouldn’t feel the need to upgrade to something nicer/lighter down the road.
Shimano’s new Ultegra GRX is stellar. The shifting is crisp, reliable, and responsive as always and the new clutch on the derailleur keeps the chain from popping off even on the roughest patches of gravel or dirt.I’ve really enjoyed the Hallowgram carbon wheels set up with the WTB Riddler tires tubeless. I’ve run a myriad of tire pressures and have yet to have any issues. I have been considering putting a 40c smooth tread tire on to replace the Riddlers, but they’ve been performing well and I loved the Riddler on my full suspension MTB, so it makes sense that I’d like the gravel version as well.Smooth enough to ride roads and just enough tread to rock some loose dirt and gravel. Cornering on pavement has felt great with them as well. I’ll likely continue to beat the heck out of them until they’ve given up the ghost and then likely swap to a smooth tread to gain a little more speed on pavement.
The Hallowgram crankset feels great as well. Shifting has been flawless and the gear ratio feels great. Obviously on flats or downhills I could stand to go a little bigger on the larger chain ring, but then I realize I’m able to climb more with the existing ratios and in the Driftless region of Wisconsin we all know how important climbing gears are to get up steep rollers.
Going back to some things I mentioned at the top of this post in regards to the internet trolls bashing some of the design features of this bike, I really haven’t had any issues with the proprietary designs.
When building the bike I did have to pull the crank and re-assemble it (following the guidelines of washer patterns and such) and had to torque things down a little past recommended spec to get everything to tighten up with no play, but so far it’s not been an issue. Loctite is also your friend when it comes to pressfit bb’s, just saying.
I made sure to double check the torque spec on the Kingpin as it is a bearing system and it did need a little more oomph than how it came out of the factory. So far I have 500 miles on it with no noise.
The thing I think upset most people was the asymmetrical drop out design. The rear wheel is not hot swappable with other wheels because it is dished 6mm to allow the drive side to be pushed over. This means that technically you have a stronger wheel as each spoke is evenly tensioned in the center of the rim.
Heed the warnings and just make sure if you want to use a different wheel set or say a 650b wheel that you get it custom laced and built so it has that proper 6mm dish. Generally a factory built or pre-built wheel isn’t going to have enough threads on the spokes to just be able to simply take a pre-existing wheel and make it work. That’s not to say that it absolutely can’t be done, but it likely won’t work, so just work with your local bike shop or professional wheel builder to talk about your options.
In relation to the wheel issue, many people complained that 700x40c wasn’t wide enough for a gravel bike. This bit kind of blew my mind because it wasn’t that long ago that everyone was riding 700x23c on their road bikes and 32c was considered a wide tire!Oh how things have changed. I suppose if you want to go monster cross/ultimate back road adventure machine, sure. A wider tire would be nice, but you can put 650b wheels on the Topstone Ultegra RX and run up to a 48c width, which is damn near close to what people are riding on the Great Divide Race these days.Personally I’m fine with 40c being the max width. If you really want that much clearance there are plenty of other bikes on the marketplace or just buy a 29er hard tail and call it a day.Much of what people have been complaining about or judging on this bike is just rubbish. Many people who probably have never even swung a leg over one and just want to complain because Cannondale uses a proprietary bb. So what, you can always order a spare as a back up if you are that worried about it.
Yes, it would be nice if all bikes came with threaded bottom brackets, but standards are ever changing and that’s because bike design is ever evolving and pushing the limits of geometry and fitting wide tires on without the bike riding like crap.
I find myself grabbing my Topstone Carbon Ultegra RX the most often out of my fleet because it’s just so fun to ride. It’s the bike that if I’m not sure where I want to go, I take it because there’s a good chance I’ll end up on some gravel or crappy rural roads that need repaving. I know the bike will provide a smooth and comfortable ride no matter where I go with it.The fact that the bike has three bottle mounts, fork mounts, and plenty of room for gear storage is also wonderful. It makes setting up things for a bike overnight a breeze.
If you were to pick one bike to have in your garage, it should be this one or something damn near like it. With smooth treaded tires you can easily keep up with a road group ride, you can do a gravel or rail trail ride, you can do some singletrack or urban cross on it, you could race a ‘cross season on it, you can adventure with it, and be comfortable while doing all of that.
My one sort of note on single track is that it wouldn’t be a terrible idea to invest in a dropper post if you are planning on trying to do more of that style of riding on the bike. Rocks, roots, etc. as I found that I get caught on my saddle a lot on this bike on single track and generally have had to slam the seatpost down to make it easier to clear that sketchy stuff.
Obviously there’s a weight penalty with a dropper, but it would make this bike legendary. I am also excited to see about trying the 2021 model with the lefty front suspension. I’m sure it’s an absolute blast to ride.
Personally I think the Cannondale Topstone Carbon line has been seriously underrated and I think it’s because people seem to hold a grudge against Cannondale for pushing the limits of bike design and technology. They aren’t doing what other big brands do where they are copying designs, they are focusing on doing what they do best in pushing the limits of what we expect a bike to be or what a bike should look like.
I fully acknowledge that Cannondale wasn’t the first nor will they be the last brand to adopt a rear suspension design on a bike, but I like their take on it more than say T*** as it’s not just an elastomer that ends up changing the actual reach on the bike.
Now I’m going to sound like a hater, but I’ve not been impressed with how some of their gravel/any road type bikes have ridden. Granted I’ve only ridden the alloy versions, but it’s still a valid opinion.
That’s one thing I’ve always appreciated about a brand like Cannondale. They aren’t afraid to be a little different, but still hold mass appeal and well known lineage with their brand.
Riding down the Badger State Trail
Another view of the updated handlebars.
Getting that lactic acid buildup out of my legs mid-ride.
Pit stop in Cross Plains, WI
Specialized Ruby Saddle
First commute home.
Assym chain stains
More fun on the Badger State Trail
At $4200 retail the Cannondale Topstone Carbon Ultegra RX holds a wealth of value. Full carbon frame, carbon wheels, Hallogram crank, tons of mounting options, a carbon seat post, built in rear suspension, tubeless ready, dropper capable, and great aesthetics to top it off. The price point is a little higher than some of the other competitors in the market, but the ride quality and weight of the bike really sets it apart.
I fully think the purchase price is worth it when you look at comparable bikes on the marketplace. The level of technology and design that went into this bike is impressive and am happy to say as a first time Cannondale owner, I’m happy with my decision to buy.
As always I was not in any way, shape, or form asked to write a review about this bike from Cannondale or anyone else. I do not benefit from the writing reviews other than hopefully helping other folks make informed decisions.
I plan on doing a follow up review once I’ve had the bike for a full year and some additional mileage on it to update on any issues that may arise. Hopefully there won’t be any as so far, so good.
In a land of seemingly endless options of independent makers and custom bag companies, why would anyone want or need a stock production bag?
I’m here to dive into the world of production cycling bags including top tube bags, seat bags, and handlebar bags. Starting with one of my all-time favorites, Topeak’s Fuel Tank (large).
Topeak has been in the cycling game for nearly 30 years. They’ve been known for their iconic Joe Blow series pumps, but have since branched out to everything from bike repair tools to bags to cycling computers, saddles, repair stands, racks, lights, and more.
I had to do some background research Topeak as it’s not apparent where they are based. A little search engine sleuthing brought me to a profile on Bicycle Retailer’s website stating that Topeak is a Taiwanese based company.
It makes sense. Taiwan is the world’s hub of cycling manufacturing. State of the art facilities with both factories and design firms are sprinkled throughout the country. If you’ve ever purchased a bike or cycling product, it was likely either manufactured or designed in Taiwan.
Based off the design and aesthetics, part of me assumed Topeak was German based. Maybe it’s the fact that Topeak and Ergon (saddle & grip company) have been so closely linked as they have co-sponsored professional cycling teams.
Anyway, that’s not what I’m here to talk about. I’m here because every time I post a photos of one of my bikes with the Fuel Tank I’m asked by someone what type of bag it is.
The Fuel Tank is a masterfully designed bag. The outside texture is a rubberized finish with a carbon like pattern. You can see in the above photo the texture and stitching is high quality.
The bag is made in two size options. I opted for the large as it can fit even the largest of phones with loads of room to spare. The size specs are below courtesy of Topeak’s website:
Topeak states that the bag is made out of a 420 denier nylon and PVC combination.
While the outside of the bag is a sleek matte black, the inside is Topeak’s signature yellow. I’m always a fan of bags that have bright interiors so you can actually see what’s inside. The bag has an included padded hook and loop divider. You can see on the left side of the bag I utilized that to create a little holder for my lip balm. This makes it easy to find and be able to grab it one handed while cruising along while riding.
The right hand side of the bag has a large mesh pocket, Topeak suggests a battery bank or something similar can be placed here on their website. All of my battery banks are too large to fit in there, but I stash things like my minimalist wallet or nutrition gels in there. It also works well for stashing a mask since we are in COVID19 times as I write this.
To provide a bit of the scope of size for this bag I can comfortably fit the following:
iPhone 8 with case
Rav Power 20k milliamp battery bank
usb micro cord
Apple lightening cord
several hydration mixes (I usually carry either a tube of Nuun or 3-4 powder packets)
2 nutrition bars (RX Bars or Clif/Luna)
a portable peanut butter packet (RX nut butter or Justins)
a packet of chamois cream (Hoo Ha Ride Glide)
portable hand sanitizer
+ more room to spare
You can fit a TON in this bag and then some. It’s one of the largest top tube bags I’ve seen on the market without being a custom product.
One of my favorite features of the Fuel Tank is the fact that you can pass a charging cable through the bag on the left hand side. This means that if you use a GPS, smartphone, or need to juice a light on the go you have the option to run a cable up to that devise while your battery bank stays safely tucked inside the bag.
I’ve only had to use this feature once on a bike camping overnight as I forgot to charge my cycling computer before I left home and it was awesome to be able to have that option without having to leave the zipper of the bag slightly open at the top.
The cable pass-thru placement allows you to tuck the cable out of the way and not jiggle around on the bag.
Another feature I love about this bag is it’s essentially waterproof. The rubberized material around the entire bag paired with the thickly padded, structure, and the waterproof zipper with a zipper garage ensures your electronics and other sundries stay dry.
I can attest to this as I got absolutely drenched last summer on my bike camping outing with Bell Joy Ride Madison. You can read my write up or watch my vlog about the trip in earlier posts on the blog.
As far as attaching the bag to a bike. I’ve been able to successfully attach it to every bike in my stable, including my large carbon tubed Topstone Carbon, which is notoriously difficult to put a strap style bag on- hence their top tubes have drilled attachment points for direct mount bag systems.
There’s a small bit of wear on the bottom of the bag, but it’s still in wonderful condition!
The retail on the Topeak Fuel Tank Large is around $50 depending on where you purchase it. I’m sure you can find some sale prices online, but always recommend checking with your LOCAL BIKE SHOP to support them.
I purchased this item with my own money via my bike shop employer. I was not asked by them or Topeak to write this review and don’t receive any monetary compensation from writing said review.
Honestly, this is one of the highest quality production bags I’ve owned and used during my many years as a cyclist. I’ve had the bag for going on two years now and it has yet to fail me or let me down.
I’m always impressed by the amount of items you can carry in the bag and have never had one returned for any reason at my place of work upon recommending the bag to customers.
Topeak has a home-run on their hands with the Fuel Tank and hope they continue to keep making the product for years to come!
That’s all for this write up. Be on the lookout for write-ups on some of Blackburn’s production bags! I’ve also been plugging away at a video review for my Cannondale Topstone Carbon RX, but have had some issues with audio. Stay tuned as I’ll likely release a write up prior to the video.