Soma Doublecross Build Longterm Review

A year ago I had an idea for a fun winter project, build my own bike up from parts. I’ve had some experience wrenching on my own bikes over the past few years, but never built a bike from the ground up. I was looking for a bike that I could use as a commuter, light tourer, and something I could use for century rides.

I had a Surly Crosscheck in my stable, so it may not have made sense to buy another steel framed cross bike. The Doublecross is a bit of a different slightly different breed. The frame itself is about a pound lighter, the geometry is slightly more slack, the quality of the powder coat was noticeably better, and the frame also had more included braze ons. To be fair Surly has since improved upon their powder coat and newer models also come with more braze ons, but I owned an older model and had been lusting over Soma’s frames for a long time.

I pulled the trigger on the frame. This was before Soma offered any complete bikes, but I’m glad I went with a custom build as it allowed me to a) learn new bike skills and b) allowed me to spec the bike the way I wanted it.

Over the winter months I started buying up parts for the bike. I knew I wanted to reuse some of the existing parts that came off of my Cross Check and also source some reliable, classy bits for it as well. If you’d like to see how the build started, click HERE.

My final build list is as follows:
Frameset- 48cm Some Double Cross (I’m 5′ 5″ and it fits nicely with a 90mm stem)
Wheels- Suzue RXC Touring Wheelset (Incredibly smooth bearings and true out of the box)
Skewers- Salsa Flip Off Purple
Tires- Resist Nomad 35c (Supple, fast rolling tires- not a lot of flat protection though)
Crank- Shimano Tiagra Triple
BB- Shimano Tiagra
Pedals- Crank Brothers Candy 2 Orange
Front Der.- Shimano 105 Triple
Rear Der.- Shimano XT 9 spd.
Shifters- Shimano Bar End Shifters 9spd
Chain- Sram 9spd
Cassette- Shimano 9spd
Shifter Mounts- Paul Thumbies
Headset- Tange Sekei Purple 1 1/8″ (Very nice looking and smooth bearings)
Handlebar- Nitto Noodle 41cm (Much more comfortable than the Randonneur bars)
Handlebar Tape- Velo Orange Leather
Bar End Plug- Fyxation Locking
Stem- No Name Silvery Goodness
Brakes- Tektro CR720
Brake Lever- Tektro Short Reach
Cables- Jagwire
Seatpost- Ritchey Classic
Seat Clamp- Salsa Lip Lock Purple
Saddle- Velo Orange
Front Rack- Nitto M18
Front Light Mount- Paul Threaded Braze On Mount
Fender- PDW Origami (I swap these from bike to bike as I hate full coverage fenders)

I’m extremely happy with the build. The only real changes I made from the original build was the saddle and the brakes. I wanted to re-use the Paul Mini Motos I had on the Cross Check, but the way some of the cable routing was on the bike…I just couldn’t quite get them set up as they way I liked. They are currently living in my parts bin awaiting a future project or I may opt to sell them off.

The original saddle I had on the bike was a Brooks Flyer. The saddle had been good to me over the years, but it’s heavy as hell and has started not being as comfortable. I adjusted the tension on it somewhat just to see if that would help and it hasn’t, so it’s going to be used at wall art in my home office or at the shop when it opens. I received the saddle as a gift, so I don’t want to sell it off.

The new Velo Orange saddle is incredibly comfortable right out of the box. The only thing I’ve done to it was put a little proof hide on it to protect it from the elements. It’s a big improvement from the Flyer. The textured top and laminate they use to help the saddle hold its shape make a big difference. Also, you can’t beat the price! The saddles aren’t made of English leather, it’s Australian, but the quality matches Brooks for a fraction of the cost. I would definitely buy the saddle again and recommend it to anyone who is leather saddle curious.
The handlebar tape I have on the bike is leather as well. Kind of fancy, I know, but I really wanted to build a beautiful bike. There’s nothing like having a matching saddle and bar tape. The bar tape is actually Velo Orange branded as well. It’s the same color as the saddle and is super comfy. Much like a saddle, it does take a little time to break in, but proof hide helps. Once the tape has been broken in, it feels like an old baseball mitt. It just feels right on the hands. I’ve been working on learning to ride without gloves over the past couple of years and have enjoyed it so much better with this bar tape. It’s not super padded, but for me that’s a good thing because too much padding actually pinches and doesn’t feel good on my hands.

The Paul thumbies have made me really happy. I used to nail my knees on the bar end shifters when I had them on my Cross Check. They’d also get scuffed up and were just not in a great spot. Having the shifters mounted on the top of the bar makes for a cleaner look. I also don’t have to worry about real estate on the handlebars as Paul makes a super kick ass light mount that threads into braze ons. The shifters themselves are in friction mode. When mixing and matching road and mountain parts, it just makes things easier. There’s not as much tweaking you have to do on the derailleurs, you can just use the shifters to trim as needed. I also like that I can dump several gears at once without having to index.

The bike rides really smooth and is extremely comfortable on long rides. The bike is a little on the heavy side. Mostly because the wheel set is a very sturdy 32hole build with a 24mm wide rim. The wider rims are nice for putting fatty tires on. I’d like to experiment with the new Soma Cazadero tires on it at some point, but I will probably wait for the weather to turn before swapping tires out.

I also have all alloy parts and absolutely no carbon on the bike. I do see the potential in the frame for being a good, comfortable cross racer. Throw a carbon fork, bars, seat post, and carbon railed saddle on the bike and it would ride like the wind. Currently I own an aluminum Raleigh cross bike, but it’s not the most comfortable thing to ride on weather beaten roads. Steel may not be the lightest material in the world, but it sure is a lot more forgiving!

Soma has done a fantastic job on their overall bike line up and the Double Cross is no exception. I get tons of compliments on the bike and the color of the frame. The pearly blue is extremely classy looking and the powder coat has held up incredibly well. The logos and the frame badge are also gorgeous. Color me in love with the bike and the Double Cross frame. I should note that the newest color of the bike is more of a gunmetal-ish grey, but still very beautiful.

If anyone reading this is debating between the Surly Cross Check and the Soma Double Cross, I would highly recommend considering the Soma. It does has a taller head tube on it which means it’s not as aggressive, but for the price I think it’s just a slightly nicer frame. That’s not to say I’m not down with Surly. I love them as well and would buy a dirt tourer or one of their many cool fat bikes,  but I just love the Double Cross more if doing a straight comparison. One other major plus, for me, is the fact that Soma uses vertical drop outs and not horizontal drop outs. I know why Surly uses horizontal dropouts and it makes for a more versatile frame, but they can be a pain in the ass when changing a rear flat. I also used to have issues with the wheel pulling to one side no matter how tight the rear skewer was on the Cross Check. I haven’t dealt with that what so ever on the Double Cross.

To wrap things up,  I plan on owning my Soma Double Cross for years to come. The bike is an absolute pleasure to ride and is a true stunner. Keeping a steel bike in your stable is always a good idea, especially a cyclocross bike as they are incredibly versatile and can allow you to ride places your skinny tired road bike wouldn’t. So, if you don’t already own one…I highly recommend looking into a good steel steed 🙂